(A) Plat submission requirements. Final plats shall be submitted to the Zoning Administrator within one year of approval of the preliminary plat, unless an extension is granted by the Planning Commission. The final plat shall conform to the preliminary plat as approved and to the requirements of all applicable ordinances and state laws, and, if desired by the subdivider, it may constitute only that portion of the approved preliminary plat which he or she proposes to record and develop at the time; provided, however, that the portion conforms to all requirements of these regulations. Submittal of any portion of the approved area shall be interpreted as satisfying the one-year submission requirement.
(Ord. 628, passed 7-11-1995; Ord. 816, passed 6-19-2007, § 431; Ord. 851, passed 8-4-2009, § 431)
(B) Fees. No fees are required for final plat submission.
(Ord. 628, passed 7-11-1995; Ord. 816, passed 6-19-2007, § 432; Ord. 851, passed 8-4-2009, § 432)
(C) Scale and final plat contents.
(1) The original and five copies of the final plat and other exhibits required for approval shall be submitted. The final plat shall be drawn in ink on tracing cloth, mylar, or similar material, and shall be at a scale of one inch to 100 feet or larger.
(2) The final plat shall show the following:
(a) Date, title, name, and location of subdivision;
(b) Streets and street names, lots, setback lines, lot numbers, and the like, except that in industrial-type subdivisions, lot designation may be excluded;
(c) Graphic scale and true north point;
(d) Monuments;
(e) Dimensions, angles, and bearings, and complete legal description of the property;
(f) Sufficient engineering data to reproduce any line on the ground;
(g) Names of adjoining properties;
(h) Location, dimensions, and purpose of any easements;
(i) Purpose for which sites are dedicated or reserved, and the transfer of ownership of the same;
(j) Certification signed and acknowledged by all parties holding title or having any title interest in the land subdivided and consenting to the preparation and recording of the plat as submitted;
(k) Certification recording the approval by the Planning Commission; and
(l) Certification recording the approval by the City Council and the acceptance of any dedications.
(Ord. 628, passed 7-11-1995; Ord. 816, passed 6-19-2007, § 433; Ord. 851, passed 8-4-2009, § 433)
(D) Supplementary data required. The final plat shall be accompanied by:
(1) Detailed construction plans of all required public improvements, the plans to be approved by the Zoning Administrator and/or City Engineer; and
(Ord. 628, passed 7-11-1995; Ord. 816, passed 6-19-2007, § 434; Ord. 851, passed 8-4-2009, § 434)
(E) Planning Commission recommendations. The Planning Commission shall approve or reject the final plat and have prepared a recommendation to the City Council recommending approval or rejection. All reasons for recommending or rejection shall be clearly stated. Notification of approval or rejection by the Planning Commission or the City Council shall be given to the subdivider within 60 days after submission of the final plat to the Planning Commission.
(Ord. 628, passed 7-11-1995; Ord. 816, passed 6-19-2007, § 435; Ord. 851, passed 8-4-2009, § 435)