1280.09  ACCESSORY LIVING QUARTERS IN SINGLE FAMILY DISTRICTS.
   (a)   Intent, Purpose and Boundaries.  It is the intent of this section to allow for and regulate the establishment of accessory living quarters in Single Family Residential Districts while protecting the integrity and character of the residential structures and areas.
   (b)   Required Conditions for Accessory Living Quarters in Single Family Districts.
      (1)   No additional Municipal number (mailing address).
      (2)   No separation of any utilities serving the main residence.
      (3)   No person, other than members of the family, caregivers or medical staff, shall reside on the premises.
      (4)   No renting or leasing the accessory living quarters.
      (5)   No more than one accessory living unit per property shall be permitted.
      (6)   Property line setbacks for unit shall be the same as district regulations.
      (7)   Site plan, floor plan and elevations must be submitted for administrative review and permit.
(Ord. 2769.  Passed 5-13-02.)
1280.03(d)  Signs
DISTRICT
TYPE SIGN
MAX. AREA
MINIMUM SETBACK
MAXIMUM
OTHER COMMENTS
FRONT
  SIDE
HEIGHT
(1)  All Residential Districts
(1) Sale, rent or lease
  4 sq. ft.
  10'
  10'
  6'
No permit required
(2) Residence, identi-fication, single-family and duplex
  4 sq. ft.
  10'
  10'
  6'
No permit required
(3) Subdivision and multifamily residence identification
20 sq. ft.
  10'
  10'
  6'
Perpetual maintenance agreement may be required
(4) Public or religious institution identification and information

    (a) Free-standing
32 sq. ft.
15'
10'
6'
Only one per institution.  Changeable copy permitted.  Planning Commission approval required.
    (b) Wall
20 sq. ft.
  See General Regulations      subsection (c) hereof
Shall be located on the front wall for purpose of identification; may not be used for advertisement of products.
(2) B-1 Office/ Service, B-2 Ltd. Service and I Ind. Districts
General Regulations.  Total sign area for each lot shall not exceed two and one-half (2.50) square feet of signage per linear foot of front wall.  Total sign area shall be the total of the areas of all signs located on the lot.  Each lot shall be limited to one free-standing sign exclusive of entrance and exit signs.
(1) Free-standing
40 sq. ft.
  15' 
5'
8'
For shopping centers with 100' frontage or greater, see paragraph (e)(3) hereof.
(2) Wall See Gen. Regs.                                                                                                                                                                                                                                                                                             
  N/A                  N/A        See 
                                            paragraph 
                                            (c)(4) hereof
Shall be displayed on the front wall enclosing the business or use to which such sign pertains, provided, however, that businesses or uses within enclosed malls may erect signs on any exterior wall of such mall with permission of the lot owner.
(3) Sale, rent, lease
In conformance with (1) or (2) above
(4) Sidewall

(5) All free-standing signs within Industrial Districts, other than entrance and exit signs, shall be reviewed and approved by the Planning Commission to insure harmony with the character and design standards of the particular park.
40 sq. ft.
  30'
  0'
  20'
No more than two (2) sidewall signs may be displayed per lot facing in opposite directions and mounted on sidewalls (sidewalls being walls most nearly perpendicular to the street on which the structure has frontage),  provided that the owner of such signs shall waive the right to erect or maintain any free-standing sign during such time as the sidewall sign shall exist.