(a) Water Service Lines. Water service lines shall be installed consistent with Ten State Standards. All water service lines shall be either HDPE 200 PSI (CTS) or Type K copper. All water service lines shall be protected from freezing and frost penetration, but in no case shall be installed less than forty-eight inches (48") below the ground or pavement surface. Services shall be constructed after the street is rough graded and prior to the installation of paved surfaces and curbs. A "W" shall be stamped on the face of the curb at the location of any water service tap.
(b) Curb Boxes and Meter Pits. Curb boxes shall be located within the tree lawn not less than two feet (2') behind the back of the curb. All curb boxes shall be adjusted to the finished ground surface. The City Engineer may require an alternative location of curb stops and/or meter pits.
(Ord. 2009-85. Passed 12-8-09.)