(a) No occupancy permit required shall be issued until these Stormwater Management Regulations have been complied with.
(b) Occupancy permits issued under this section are conditioned upon a permit being obtained from the Building Inspector before any of the following additional work is performed which will or could obstruct the flow or passage of stormwater:
(1) Install drain tile within a ditch or swale or cover drain tile installed in a ditch or swale; or construct a bridge or culvert over or in a ditch or swale.
(2) Change the grade of land so as to affect the drainage or change the drainage pattern of any land or part thereof;
(3) Build, change, alter or enlarge or permit the building, changing, alteration or enlargement of any existing, proposed or future structure upon any parcel of land or part thereof;
(4) Change the existing or natural drainage of land so as to obstruct, impede, accelerate, channel or concentrate the flow of rain or surface waters onto or from the lands of another so as to cause damage thereto or create a nuisance thereon;
(5) Interfere with or obstruct the flow of surface water over easements both public and private or to impede the flow of surface water across public or private drainage easements or private property in a manner contrary to the drainage pattern;
(6) To construct landscaping, fences, shrubbery or trees which will change the drainage pattern;
(7) To bury and cover over any utility structures, manholes or other appurtenances or any utility system with fill dirt, landscaping berms, paving, etc.