Table 154.208.1 provides density standards for all nonresidential land uses within the standard zoning districts in which they are permitted.
STANDARD ZONING DISTRICT | MAXIMUM FLOOR AREA RATIO (FAR) | MAXIMUM BUILDING SIZE w/o SUP APPROVAL | MAXIMUM BUILDING SIZE | MINIMUM LANDSCAPE SURFACE RATIO |
STANDARD ZONING DISTRICT | MAXIMUM FLOOR AREA RATIO (FAR) | MAXIMUM BUILDING SIZE w/o SUP APPROVAL | MAXIMUM BUILDING SIZE | MINIMUM LANDSCAPE SURFACE RATIO |
Limited Agricultural (LA) | 0.25 | 50,000 sq. ft. | NA | 50% |
Countryside Residential (CSR) | 0.25 | 10,000 (1) sq. ft. | 20,000 | 40% |
Low Density Residential (LDR) | 0.25 | 10,000 (1) sq. ft. | 20,000 | 40% |
Medium Density Residential (MDR) | 0.25 | 10,000 (1) sq. ft. | 30,000 | 35% |
High Density Residential (HDR) | 0.3 | 25,000 (1) sq. ft. | 50,000 | 25% |
Neighborhood Office (NO) | 0.25 | 10,000 (1) sq. ft. | 20,000 | 40% |
Planned Office (PO) | 0.3 | 25,000 (1) sq. ft. | 100,000 | 40% |
Neighborhood Commercial (NC) | 0.25 | 10,000 (1) sq. ft. | 20,000 | 25% |
Planned Commercial (PC) | 0.3 | 25,000 (1) sq. ft. | 75,000 | 25% |
General Commercial (GC) | 0.5 | 25,000 (1) sq. ft. | NA | 15% |
Downtown Commercial (DC) | 3 | 10,000 (1) sq. ft. | 25,000 | 0% |
Planned Industrial (PI) | 0.5 | 100,000 sq. ft. | NA | 25% |
Light Industrial (LI) | 0.75 | 25,000 (1) sq. ft. | 50,000 | 15% |
Heavy Industrial (HI) | 1 | 100,000 sq. ft. | NA | 15% |
Footnotes: | ||||
(1) Buildings exceeding this limit shall require special use permit approval as group developments, see § 154.407. | ||||
(Ord. O-05-04, passed 4-11-05)