(a) Plans submitted shall be on twenty-four inch by thirty-six inch white prints having blue or black lines and shall be neatly and accurately prepared. Judgment should be exercised in the design, layout and presentation of proposed improvements.
(b) For projects or subdivisions having more than one sheet of plans, a general plan having a scale of one inch equals 100 feet shall be provided showing the overall project or subdivision and indicating the location of all improvements shown in the detailed plans. Street names, lot lines and lot numbers shall be shown in all plans. Easements shall have a minimum width of twelve feet. Sewers in easements shall be kept at least two feet away from side or rear lot lines. Superimposed on this general plan shall be two-foot contours of the area, including the area at least 100 feet outside of the subdivision.
(c) All sewers shall be shown in plan and profile. Profiles of sewers shall indicate the size, invert and slope of the sewer and shall also indicate the existing ground along the route of the sewer and the proposed or existing top of the curb, edge of pavement grade or proposed ground.
(d) Two bench marks shall be provided. Elevations shall be on U.S.G.S. datum. Bench marks for the work shall be indicated on the plan.
(e) Finished grades of structures shall be indicated on the plan or profile for all structures.
(f) A copy of the computed plat shall be submitted where applicable.
(g) All plans submitted shall bear the seal of the registered professional engineer responsible for the design.
(h) One mylar copy of as-built plans for water, sanitary sewers, roads and the storm sewer system, and certification from a registered professional engineer that all surface grades, roads and structures are in conformance with the approved plan, shall be provided prior to acceptance of the subdivision improvements by the Village of Franklin.
(i) Complete subdivision improvement plans shall be submitted prior to review and approval of any portion thereof.
(Ord. 96-87. Passed 5-13-96.)