(A) When required by the Village Council, the owner of any property served by a building sewer carrying industrial wastes shall install a suitable control manhole in the building sewer to facilitate observation, sampling and measurement of wastes. Such manholes, when required, shall be accessibly and safely located, and shall be constructed in accordance with the plans approved by the Village Council. The manhole shall be installed by the owner at his or her expense and shall be maintained by him or her so as to be safe and accessible at all times.
(B) All measurements, tests, and analysis of the characteristics of waters and wastes to which reference is made in §§ 50.20(C) and 50.22(A) shall be determined in accordance with the Standard Methods for the Examination of Water and Sewage and shall be determined at the control manhole provided for in division (A) of this section or upon suitable samples taken at the control manhole, or if no manhole then at a point or location at the entry of the waters and wastes into the public sewer. In the event that no special manhole has been required, the control manhole shall be considered to be the nearest down-stream manhole in the public sewer to the point of which the building sewer is connected.
(Ord. 17, passed 9-14-81) Penalty, see § 50.99