A.
to
size and dimension requirements for residential
. If an existing in single ownership at the time of adoption of this Code does not meet minimum or dimension requirements of the applicable residential zone, the may be occupied by a residential permitted outright in the respective zone. If there is an area deficiency, the residential shall be limited to a single- residence.
B.
to
requirements. The following to the requirement for a or in a residential zone are allowed without the need for an adjustment:
1. If there are
on both
with
less than the required depth for the zone, the
for the new
need not exceed the average
of the abutting
; and
2. If there is a
on one
with a
less than the required depth for the zone; the
for the new
need not exceed a depth one-half way between the depth of the
on the
and the required
depth.
The
may require a greater
depth than specified in the Code when the
abuts a
that is designated for widening by the
.
C. Projections into required
. The following may project into required :
1. Unroofed paved terraces and wood decks less than three feet in height may project into required
or
;
2. Unroofed landings and stairs may project into required
or
;
3. Window sills, belt courses, cornices, eaves, canopies, sunshades, gutters, leaders and similar incidental architectural features – excluding balconies and decks more than three feet from ground level – may project not more than two feet into any required
;
4. Chimneys shall not project more than two feet into any required
;
5. No projections may encroach into or over any utility
.
(Ord. 2009-01, passed 3-9-2009; Ord. 2022-01, passed 5-9-2022)