An
who wishes to remove
or do work within a Natural Resource Area (NRA) shall submit for a
permit. It shall include the information required by this subsection. The information shall be submitted either prior to or concurrent with a land
such as
,
permit, planned
, preliminary
or
. Where no land
permit is required, the
permit shall be submitted and approved prior to any physical modification of the subject
.
A.
must verify the natural resource area on their property as described in § 17.5.050.
B. For the entire subject property (natural resource area and non-natural resource area),
must submit a scale map of the property that includes:
1. Location of all
on the property;
2. Outline of any existing disturbance area, including the location of existing adjacent
and paved areas, utilities, culverts, stormwater management facilities or bridges;
3. Location of any
or water bodies on the property, including a delineation of the sensitive lands and vegetative corridors consistent with Clean Water Services Design and Construction Standards;
4. Location of 100-year
and
boundary as defined by § 17.8.315B. Basis for Establishing
; and
5. Topography shown by contour lines of two-foot intervals for slopes less than 15% and by ten-foot intervals for slopes 15% or greater. On properties that are two
or larger, such a contour map is required only for the portion of the property to be developed.
C. The nature of the work proposed, and/or the reasons for removal of
. If applicable, this shall include detailed
of proposed
outlining total disturbance area, including, proposed
footprints,
property improvements, utilities and landscaping.
D. The following additional information shall be provided about the
:
1. For properties containing less than one
of
, the location of all
within the
that are greater than six inches diameter at breast height (DBH), shall be identified by size and species. For properties containing one
or more of
, the
may approximate the number of
and the diameter range, and provide a listing of the dominant species;
2. For proposed disturbance areas containing less than one
of
, all
with a diameter of six inches or greater that will be removed shall be specifically identified as to diameter at breast height (DBH) and species. For proposed disturbance areas containing one
or more of
an approximate of the number of
, their diameters and the dominant species; and
3. If grading will occur within the
, a grading plan showing the proposed alteration of the ground at 1-foot vertical contours in areas of slopes less than 5%, and two-foot vertical contours in areas of slopes 6-15%, and at five-foot vertical contours of slopes 15% or greater.
F. Evidence of submittal of appropriate
to local, state and/or federal agencies as required.
(Ord. 2009-01, passed 3-9-2009; Ord. 2016-16, passed 9-26-2016)