(A) General. The minimum dimensions for standard car parking spaces and parking lot aisles shall comply with Table 166.09, Dimensional Standards for Parking Spaces and Aisles, below:
PARKING ANGLE | STALL WIDTH (FT) | STALL DEPTH (FT) | AISLE WIDTH FOR TWO-WAY TRAFFIC (FT) (1) |
Parallel | 9 | 22 | 22 |
45 degrees | 9 | 18 | 22 |
90 degrees | 9 | 19 | 22 |
(1) Aisle widths are provided for two-way traffic. In cases where traffic is proposed for one-way travel, then the width of the aisle may be reduced by one-half. | |||
(B) Dimensional adjustments. Parking structures may be subject to dimensional adjustments based on utilization, but in no case shall the standard space width be less than eight feet. Reduction in design standards shall be subject to approval by the Zoning Administrator.
(Ord. 05-10, passed 3-23-10)