(A) Boundary of plat, based on an accurate traverse, with angles and lineal dimensions;
(B) Exact location, width and name of all streets within and adjoining the plat, and the exact location and widths of all cross-walkways. Proposed street names shall be shown;
(C) Certified survey showing dimensions to property lines and accessibility to public streets;
(D) Before the final plat of any subdivided area shall be approved and recorded, the subdivider shall furnish profiles of all streets and alleys in the proposed subdivision, drawn to a scale of 50 feet to the inch and a vertical scale of five feet to the inch. Elevations shall be referred to a permanent recorded benchmark of the city datum. Street grades for major streets shall comply with § 153.132;
(E) True angles and distances to the nearest established street lines or official monuments (not less than three), which shall be accurately described in the plat;
(F) Municipal, township, county or section lines accurately tied to the lines of the subdivision by distances and angles;
(G) Radii, internal angles, points and curvatures, tangent bearings and lengths of all arcs;
(H) All easements for rights-of-way provided for public services and utilities;
(I) All lot numbers and lines, with accurate dimensions in feet and hundredths;
(J) Permanent monuments shall be placed at all corners and at points of tangency of curve lines along the boundary of the subdivision. Permanent monuments shall be of concrete with minimum dimensions of four inches by four inches, and 36 inches long, with a steel dowel three-eighths inch in diameter, at least two and one-half inches in length, embedded so that the top of the dowel shall be flush with the surface and at the center of the monument. All lot corners not marked by concrete monuments shall be marked by galvanized or wrought iron pipe or iron or steel bars at least 18 inches in length and not less than one-half inch in diameter. The top of the pipe or bar is to be set level with the established grade of the ground. The location of all concrete and iron monuments shall be shown on the map;
(K) Accurate outlines and legal descriptions of any area to be dedicated or reserved for public use, with the purposes indicated thereon, and of any area to be reserved by deed covenant for common uses of all property owners;
(L) Building setback lines, if any, accurately shown by dimensions;
(M) Protective covenants, if any, which meet with the approval of the City Council shall be lettered on the final plat;
(N) Certification by a registered surveyor to the effect that the plat represents a survey made by him or her and that monuments and markers shown thereon, exist as located and that all dimensional and geodetic details are correct;
(O) Notarized certification, by owner or owners, or by any mortgage holder on record, of the adoption of the plat and the dedication of streets and other public areas;
(P) Certifications showing that all taxes and special assessments due on the property to be subdivided have been paid in full;
(Q) Proper form for the approval of the City Council with space for signatures;
(R) Approval by signatures of city, county and state officials concerned with the specification of utility installations; and
(S) This approval of the final plat shall be deemed to constitute or effect an acceptance by the public of the dedication of any street or other proposed public way or space shown on the plat.
(1986 Code, § 20.18.020) (Ord. 754, passed 9-1-1959)