1337.28 WET HEAT AND PIPING CODE.

   (a)   General Provisions. Before a permit shall be issued for the installation of any steam or hot water boiler, or any device performing some specific service in connection with any hot or cold water heating or air conditioning system or plant, the capacity of which might affect, in whole or in part, the efficiency of the system or plant, the contractor installing such device, or the manufacturer of same, shall furnish the HVAC Inspector with such test data, measurements, ratings, capacities or other information as may be required for the purpose of determining ratings or capacities of such devices in accordance with the provisions of these regulations.

   (b)   Alterations, Additions and Repairs. Wherever the heating or air conditioning requirements, as determined by these provisions, of any existing building provided with a hot or cold water heating or air conditioning system or plant are hereafter increased or altered, either by the construction of an addition or additions to such building or by an increase in the portion of the building to be heated or conditioned or in any other manner, the capacity of the heating or air conditioning system or plant serving same shall be increased to that capacity which would be required by this Code for a new installation designed to meet equal heating or air conditioning requirements.
(Ord. 46-13. Passed 5-28-13.)