Loading...
939.511 METER REPAIRS AND CHARGES.
   The cost of repairs or replacement of meters smaller than three inches made necessary because of normal wear and deterioration, will be assumed by the City. If the need for repairs or replacement of the meter is caused by freezing, hot water, negligence or malicious damage, a charge based on the actual cost will be made to the account holder for repair or replacement of the meter. The cost for repairs or replacement of meters three inches and larger is the property owner's responsibility.
(Ord. 2017-10. Passed 2-6-17.)
939.512 TAMPERING WITH METER.
   No person except a duly authorized employee of the City shall change or remove or break the seal on any meter after it is installed. Meters and appurtenances attached thereto shall not be tampered with. If the City finds that a meter seal has been broken and/or there is evidence that a meter has been tampered with, water service shall be terminated and the account holder may be cited for "theft of services" with corresponding criminal sanctions. The account holder shall also pay for the estimated quantity of water that has not been registered because of said tampering before water service is reinstated.
(Ord. 2017-10. Passed 2-6-17.)
939.513 INOPERABLE METER OR REMOTE REGISTER.
   No person shall consume or make use of water or City utility service(s) supplied by the City for any purpose whatsoever, except as hereinafter provided unless such water shall have passed through a meter supplied by the City. Should a meter prove to be inoperable or unreadable, the City shall estimate consumption based upon the previous six months' actual metered consumption, or as determined by the Public Utilities Office with concurrence of the Safety Service Director. However, no more than three estimated bills will be issued based upon estimated consumption, after which service may be terminated until such time that an operable meter is installed and any fees associated with the installation or concurrent delinquency have been paid in full.
(Ord. 2017-10. Passed 2-6-17.)
939.514 BYPASSES ON METER SETTINGS.
   All commercial non-residential and industrial accounts size three inches and larger must have a by-pass line and a test port for the purpose of testing the meter without interruption or loss of service to the customer. Such by-pass installation shall be in accordance with the City specifications, and shall be sealed.
(Ord. 2017-10. Passed 2-6-17.)
939.515 METER SETTINGS AND LOCATIONS.
   Gate valves must be provided on both the inlet and outlet sides of the three inches and larger meters and as close thereto as possible in accordance with the City standards. Owner is responsible for valve maintenance and operations.
(Ord. 2017-10. Passed 2-6-17.)
939.516 TESTING OF METERS.
   (a)   Meters may be tested by the City or at the request of the account holder, but not more than once per calendar year. If requested by the account holder, such request shall be in writing and shall be accompanied by the payment for the established charge or estimated cost for the size of meter tested. If upon testing, the meter is found to be accurate in accordance with the City specifications, the testing charge shall be retained by the City. If the meter is found to be inaccurate, the testing charge shall be credited to the account holder.
   (b)   The City reserves the right, with appropriate notification to the account holder, to require three inches and larger meters to be tested. The cost of such tests will be assumed by the City, except that any parts necessary for the repair of meters will be billed to the customer. In addition, it may be necessary to remove the meter for testing, thereby temporarily interrupting service. Account holders will be given thirty days written notice by the City of such tests, in order to prepare, during which time the account holder can install a test plug and/or bypass. Every effort will be made to schedule tests at a time convenient for the account holder. Where a test has been scheduled and it is found that the inlet or outlet valve on the account holder's meter setting will not permit a tight shutoff, thereby delaying such test(s), the account holder will be required to have the valve(s) repaired at the account holder's expense. During this period of delay and until the repairs permit a rescheduling and testing of the meter, the account holder will be billed for water consumption at an estimated rate to be determined by the City, based upon the average of the previous six months' consumption.
(Ord. 2017-10. Passed 2-6-17.)
939.517 REMOTE REGISTRATION INSTALLATION FOR PREMISES WITH FINISHED BASEMENTS.
   All builders and/or owners of new construction or remodeling must also provide one-half inch conduit or approved meter wiring from the meter to the outside of the building so that the Division of Water can set a remote-read meter. The Division of Water will specify the location of the remote-read meter.
(Ord. 2017-10. Passed 2-6-17.)
Loading...