(A) No encroachments, including fill, new construction, substantial improvements or new development, shall be permitted within a distance of 20 feet each side from top of bank, or five times the width of the stream, whichever is greater, unless certification, with supporting technical data, by a registered professional engineer is provided, demonstrating that such encroachments shall not result in any increase in flood levels during the occurrence of the base flood discharge.
(B) The BFE used in determining the regulatory flood protection elevation shall be determined, based on the following criteria:
(1) When base flood elevation (BFE) data is available from other sources, all new construction and substantial improvements within such areas shall also comply with all applicable provisions of this chapter, and shall be elevated or floodproofed in accordance with standards in §§ 151.060 and 151.061.
(3) All subdivision, manufactured home park and other development proposals shall provide base flood elevation (BFE) data, if development is greater than five acres or has more than 50 lots/manufactured home sites. Such base flood elevation (BFE) data shall be adopted by reference in accordance with § 151.021 and utilized in implementing this chapter.
(4) When base flood elevation (BFE) data is not available from a federal, state or other source as outlined above, the reference level shall be elevated or floodproofed (nonresidential) to or above the regulatory flood protection elevation, as defined in § 151.005. All other applicable provisions of § 151.061 shall also apply.
(Ord. eff. 10-6-2003; Ord. eff. 3-12-2012; Ord. eff. 8-11-2014; Ord. eff. 11-10-2014)