A. Construction plans as required in these regulations shall be prepared for all required improvements. Plans shall be drawn at a scale of not more than one inch equals one hundred feet (1" = 100') on sheets of twenty four inches by thirty six inches (24" x 36").
B. Plans for required improvements shall comply with all standards and specifications adopted by ordinance or resolution by the governing body.
C. Improvement plans shall include, but not be limited to, the following:
1. Plans and profiles showing the locations and typical cross section of proposed street improvements including curbs and gutters and sidewalks;
2. The location, size, profile and invert elevations of proposed sanitary sewers, including manholes;
3. The location and size of proposed water mains, valves, fittings and fire hydrants, including service taps underneath proposed streets;
4. The location and design of drainage structures, easements or rights of way dedicated to the public including typical cross sections of all channel improvements and a site grading plan. Improvement plans shall be accompanied by drainage calculations in accordance with the adopted standards and regulations for drainage improvements; and
5. The location of all existing or proposed easements and rights of way and a typical cross section of the proposed utility installations with the easements.
D. Improvement plans shall be prepared by and bear the seal of a registered engineer in the state. (Res. 901, 5-10-1977)