(a) Lot arrangement and design shall be such that all lots will provide satisfactory building sites that are properly related to the topography and the character of surrounding development.
(b) All lots shall conform to or exceed the requirements of this Code for the district in which they are located and the use for which they are intended.
(c) Each lot shall front on a public thoroughfare.
(d) The minimum lot size, width and setback shall be as specified in Section 1173.02 Dimensional Standards.
(e) All side lot lines shall be at right angles to street lines and radial to curved street lines, except as otherwise approved by the Planning Commission.
(f) Corner lots fronting two streets shall be avoided except where otherwise approved by the Planning Commission.
(g) No corner lot shall be less than 75 feet in width, as measured at the building line.
(h) Lots shall have a minimum depth of 120 feet.
(i) The average depth of a lot shall not exceed two and one-half times its average width.
(j) Lot grading plans shall be required as specified by the City Engineer and in accordance with the standards contained in the City of Defiance Engineering Handbook.
(Ord. 7675. Passed 11-11-14.)