In order to assure adequate vehicle access for uses, the following standards shall apply:
(a) There shall be adequate provision for ingress and egress to all uses. For single- or two-family residential dwellings, driveways shall be a minimum of 9 feet in width. For all other uses, driveways shall be a minimum width of 22 feet and may be located on more than one property unless a cross access easement serving multiple properties is approved as part of the site plan review process. If one-way loop drives are approved as part of the site plan review process, the width of an individual drive shall be at least 11 feet.
(b) These loading space standards shall apply to the Mixed Use Business District and Planned Office District. A loading space shall have minimum dimensions of not less than 12 feet in width, 50 feet in length, exclusive of driveways, aisle, and other circulation areas, and a height clearance of not less than 15 feet. One off-street loading space shall be provided and maintained on the same lot for every separate occupancy requiring delivery of goods and having a gross floor area of up to 5,000 square feet. One loading space shall be provided for each additional 10,000 square feet or fraction thereof. Projects located in the Mixed Use Business District and Planned Office District may request a waiver from these loading space requirements when it is shown that adequate lot area is not available for dedicated loading spaces for each use on the property.
(c) For parcels with continuous frontage under 100 feet, one driveway is permitted for ingress and egress. In the case of a corner lot, one limited access driveway is permitted along each public street frontage area. For parcels with more than 300 feet of frontage, a second driveway may be permitted by the Planning and Zoning Commission following completion of a traffic impact study, as described in Chapter 1139.