§ 94.23 SPECIFICATIONS FOR COMMERCIAL DISTRICTS.
   (A)   All driveways hereafter constructed shall be of concrete and shall be not less than 12 feet and not more than 24 feet in width, measured at the property line, with an eight-foot radius on each side of the point of joining with the traveled thoroughfare. The entire width of the opening shall be paved from the place of joining the thoroughfare to the property line of the petitioner. The place of joining will be determined by the type of curb and gutter. No curb shall be cut or removed without prior approval of the Public Works Superintendent. All radii shall be curbed to a vanishing point at the street side of the sidewalk, or if no sidewalk exists, to a point designated by the Public Works Superintendent.
   (B)   No driveway shall be constructed within 40 feet of an intersecting street, or within 30 feet of another driveway on the same property, or less than one foot from the petitioner's property line extended.
   (C)   The grade of any sidewalk shall not be altered by the work done. The driveway shall be at the same grade as any existing sidewalk. All new driveways shall provide for sidewalks. All sidewalks shall be four feet wide with an expansion joint on each side abutting the driveway. All sidewalks crossing a driveway shall have not more than one-fourth inch per foot cross slope and shall be the same thickness as the driveway to be constructed, but in no case less than five inches thick.
   (D)   If the petitioner contracts such construction to a construction company, the contractor must obtain approval from the town through the issuance of a driveway construction permit.
   (E)   Drawings/sketches of the proposed driveway shall be submitted with the driveway construction permit application and kept on file at the Public Works Department.
(Ord. 27-2004, passed 10-18-04)