The final plat shall give the following information:
A. All dimensions, angles, bearings and similar data on the plat shall be tied to primary control points. Locations and descriptions of the control points shall be given. Except where deemed clearly unreasonable or infeasible by the city council, these control points shall be located section corners of the coordinate system of the state;
B. Certification of plat by registered surveyor as to the accuracy of survey and plat;
C. Certification on plat by the mayor and city finance officer that the plat has been approved for recording in the office of the register of deeds;
D. Certification on plat of title showing that the applicant is the owner, that the making of the plat receives his consent and is in accordance with his desires and a statement by the owner dedicating streets, rights-of-way and any other sites for public use;
E. Certification on plat of title showing that the director of equalization certified that there is on record in the office a copy of the within described plat;
F. Certification on plat of title showing that the county treasury certified that all taxes which are liens upon the within described lands are fully paid according to the records of my office;
G. Certification on plat of title showing the register of deeds filing information;
H. Certification on plat of title showing that street authority has approved the access to the county or state highway, or the city or county road;
I. Date, title, name and location of subdivision, graphic scale and north arrow;
J. Vicinity sketch at a scale of four hundred (400) feet to one inch;
K. If applicable, certification that the subdivider has complied with one of the following alternatives: all the improvements have been installed in accordance with the requirements of this title; or a surety bond has been posted with the city in sufficient amount to assure such completion of all required improvements;
L. Location and description of monuments;
M. Lot numbers, lot lines and frontage dimensions;
N. Name and right-of-way width of each street, easement or other right-of-way;
O. Names and locations of adjoining subdivisions and streets, the location of adjoining unplatted properties and the names and addresses of the owners of adjoining unplatted properties;
P. The plat shall be at a scale of one hundred (100) feet to one inch or larger;
Q. Protective covenants shall either be placed directly on the final plat or attached thereto in form for recording;
R. Tract boundary lines, right-of-way lines of streets, easements and other right-of-way and property lines of residential lots and other sides with accurate dimensions to the nearest one hundredth of a foot; bearings of deflection angles, radii, arcs and central angles of all curves with dimensions to the nearest minute;
S. All plats shall be uniform size overall as required by state law;
T. Sanitary sewer and water plans and specifications shall be approved by the South Dakota Board of Water and Natural Resources;
U. All formal irrevocable offers of dedication for all streets/roads, alleys, parks and other uses as required. (Ord. 568 (part), 2002: Ord. 433 (part), 1995)