16.04.380   Section 3109 - Swimming Pool Enclosures and Safety Devices.
   Adopt Section 3109 of the 2022 California Building Code.
   Add Section 3109.3 to the 2022 California Building Code to read as follows:
   3109.3 Inspections for Swimming Pools.
   A.    All Work to Be Inspected. All pool installations or alterations thereto including equipment, piping and appliances related thereto shall be inspected by the Building Department to insure compliance with the requirements of the California Building Code.
   B.   Called Inspections. It shall be the duty of the person doing the work authorized by the building permit to notify the Building Department that said work is ready for inspection. Such notification shall be given not less than twenty-four hours before the work is to be inspected.
      1.   Pregunite inspection is required when all steel is in place, piping from the pool area is in with pressure test, all steel and related attachments are properly bonded and underwater light housing is installed;
      2.   An inspection is required for all conduit and gas piping under slabs before decks are poured;
      3.   Final inspection is required after all equipment is in place and operating, the pool is filled with water and all fences and gates are installed;
      4.   A reinspection fee per the adopted fee schedule per inspection will be charged for each inspection over two where the work is not ready or corrections have not been completed;
      5.   The owner shall arrange with the Building Department for inspectors to enter the property to make necessary inspections in connection with the pool. (Ord. 22-2245, part, 2022; Ord. 19-2189, § 1 (part), 2019)