A. Plans, profiles and details shall be legibly drawn, printed or reproduced on twenty-four-inch by thirty-six-inch sheets. A border shall be made on each sheet providing one-half inch at top, bottom and right side and one-and-one-half inches on the left side.
B. A suitable title block shall be placed in the lower right corner or along the right edge and provide adequate space for approval by the City Engineer and for approval of plan revisions.
C. Plan and profiles shall be drawn to the scale of one inch equals forty feet or larger unless approved by the City Engineer. Details shall be drawn to such scale that clearly shows the facility being constructed. The scales for various portions of the plans shall be shown on each sheet.
D. A vicinity map shall be shown on the first sheet of all sets of plans.
E. A north arrow shall be shown on each sheet when applicable.
F. Plans shall be laid out to orient north to the top or right edge of the sheet unless approved otherwise by the City Engineer.
G. All lettering shall be one-eighth inch minimum.
H. If the plans include three or more sheets, a cover sheet showing the streets, lots, easements, storm drains, index and vicinity map shall be included.
I. The form of all plans shall conform to such additional requirements as may be established by the City Engineer. The final form of all plans shall be as approved by the City Engineer.
(Ord. 2085, § 2 (part), 2011; Ord. 1384, Exhibit A (part), 1986)