§ 17.400.025 AUTOMATIC TELLER MACHINES (ATMS).
This Section provides location, development, and operating standards for automatic teller machines (ATMs) in compliance with Article 2 (Zoning Districts, Allowable Land Uses and Zone-Specific Standards).
A.   Location Requirements. ATMs proposed on the exterior of structures shall be (see Figure 4-1):
   1.   Setback from an adjacent street curb or alley by a minimum of seven feet.
   2.   A privacy area immediately in front of each ATM, measuring at least five-feet-wide by four-feet- deep, shall be provided. Methods for defining the privacy area shall be approved by the Director.
   3.   Located to not eliminate or substantially reduce any landscaped areas.
   4.   Located to not allow drive-through access from a vehicle.
   5.   Located to ensure the safety and security of patrons.
   Figure 4-1 ATM Location Requirements
B.   Design. All construction and modifications to the exterior of the structure pertaining to the installation of the ATMs shall be completed in a manner consistent with the architectural design of the structure, and in conformance with all applicable City architectural standards and guidelines.
C.   Lighting. Each exterior ATM shall be provided with security lighting in compliance with § 17.300.040 (Outdoor Lighting) or State law, whichever is more restrictive.
D.   Maintenance. Each ATM shall be provided with receptacles sufficient in size and number to accommodate trash and smoking materials generated by users of the ATM.
(Ord. No. 2005-007 § 1 (part); Ord. No. 2022-008; Ord. No. 2024-006)