The developer shall furnish with the application for approval of a major subdivision a subdivision plat which includes the following:
(a) The final plat shall be drawn and signed in India ink on a permanent reproducible material at a scale not less than 100 feet to one inch; Sheets shall be 24 inches by 36 inches in size, if necessary, the plat shall consist of several sheets including an index and references to adjoining sheets. The plat shall include only the portion of the subdivision proposed for immediate recording and development and show the following:
(1) Control points to which all dimensions, angles, and bearings are to be referred, nearest street, or section line or other established point.
(2) Lines and boundaries, center lines and right-of-way lines of streets, easements, and other rights-of-way; natural and artificial watercourses, streams, and shorelines; corporation lines; and property lines of all lots and parcels with distances, radii, arcs, chords, and tangents of all curves, nearest one-hundredth of a foot; bearings, nearest second. All lines must have bearings. All lots and subdivision boundaries shall have no more than a .01 foot-mathematical error. Closures shall be checked by the Director of Public Safety and Service.
(3) Streets, the name and width of each street within proposed subdivision and those adjoining; building setback included.
(4) Lot and block identification, number or letter, in progressive order, for each lot and block conforming with the Recorder's procedures.
(5) Dedication and acceptance, boundaries of and purpose for which any parcels, other than residential lots, area to be dedicated or reserved for public use; purpose of easements.
(6) Monuments, location and description of those found, set or to be set.
(7) Names of recorded owners of adjoining property shown on the latest tax maps within 100 feet of the boundaries of the proposed subdivision.
(8) Reference to subdivision plats of adjoining platted land by name, volume, and page of the Recorder's maps.
(9) Certification by owner of acceptance of plat and statement offering dedication of streets, rights-of-way, and any sites for public use or reserved by deed covenants for common use of all property owners.
(10) Certification and seal by a registered surveyor or engineer as to preparation and details of survey and plat.
(11) Protective covenants, reference to or included on plat.
(12) Title of subdivision, municipality, county, state, original township section, tract, or lot; scale (shown graphically), north arrow, and date.
(13) Approval statement for the Commission and City officials or County officials as may be required.
(b) Improvement Plans. Drawings and specifications showing cross sections, profiles, elevations, construction details, and specifications for all required improvements. The drawings and specifications shall be in accordance with the requirements of Appendices A, B, and C to these regulations.
(Ord. 74-76. Passed 9-13-76.)