(a) General. After receiving notice of approval of the preliminary plat and prior to the filing of the final plat, the subdivider shall present to the Service Director three (3) sets of the detailed engineering drawings and specifications, and supporting documentation as applicable, of all utility and street improvements to be constructed in the proposed subdivision as required by the City and/or other agency's standards. The Service Director shall, within five (5) days after the filing of the above engineering drawings and specifications, transmit copies of same to other City officials, as applicable, for review. The Service Director, after reviewing reports from such officials, shall notify the subdivider of any recommended changes or suggestions so that the subdivider may appropriately modify the engineering drawings and specifications. Subsequent to the final approval of construction drawings and specifications, the subdivider shall make all required submittals to the Ohio Environmental Protection Agency and shall provide the City with indication of approval by such agency. Subsequent to the final approval of construction drawings and specifications (by the City), the subdivider may submit the final plat for approval. The engineering drawings and specifications shall be prepared by (or under the supervision of) and sealed by a registered professional engineer.
(b) Construction Drawings. Construction drawings shall be made with reproducible ink on a permanent reproducible material 24 inches by 36 inches in size and shall generally include the following items:
(1) Title Sheet.
(2) Location Sketch.
(3) Existing and Proposed Site Plan.
(4) Grading Plan.
(5) Typical Sections.
(6) Plan and Profile.
(7) Cross-Sections.
(8) Summary of Quantities.
(9) Design and Drainage Calculations and/or Storm Water Management Plan.
(10) Erosion Control Plan.
(11) Geometric Details.
(12) Detail Drawings.
(13) General Notes.
(c) Record Drawings. The subdivider shall provide to the City as-built marked up prints of the drawings, based on as-built measurements, of all constructed improvements before final acceptance of the improvements by the City. Failure to supply the as-built marked up prints of the drawings may constitute withholding of the construction performance guarantee and/or approval of the final plat.
(d) The subdivider shall be required to follow the requirements herein and to utilize any other applicable current City specifications for all improvements within the jurisdiction of these Subdivision Regulations.
(Ord. 0-37-95. Passed 5-15-95.)
(Ord. 0-37-95. Passed 5-15-95.)