(a) Residential, R-15, R-12, R-10 , RM.
(1) Maximum six (6) feet high fence is allowed from front set back to rear and along back of lot.
(2) Shall not impede on neighbor’s visibility of approaching traffic.
(3) All fences are to be made of standard fencing material of strong quality and no chicken wire, snow fence material (except when used for its designed purpose and is removed during April 1 through November 1), or barbed wire will be accepted.
(4) If an existing condition exists were putting a fence on the property line is closer than three (3) feet to a neighbor’s house, a minimum of three (3) feet of clearance must be maintained.
(5) Any fences totaling forty (40) or more linear feet will require a permit.
(b) Commercial, Service, Industrial, etc.
(1) Maximum eight (8) feet high fence permitted.
(2) No barbed wire or razor wire permitted.
(3) If adjacent to a residential district, a screening will be required as stated in the appropriate district section.
(Ord. 0-53-05. Passed 8-15-05.)