(a) Permitted uses shall be only those specified in the district in which located.
(b) Building height and set back requirements shall be the same as for the district in which located.
(c) The average lot areas per dwelling unit shall not be reduced below the specified area requirements for the district. However,individual lot requirements for width, depth, area, side or rear yard may be modified provided any such requirements shall not be reduced more than twenty percent (20%).
(d) At least two off street parking spaces shall be provided for each dwelling unit. Service drives and other service facilities shall be located entirely within the project site.
(e) Plans shall provide for suitable street widening as may be necessary to facilitate the circulation of vehicular traffic; the appropriate extension of public utilities, including sanitary sewers, storm drainage and water mains along street frontage; and suitable screen planting and landscaping.
(f) A two year completion date shall be placed on street completion beginning with the date the plat is recorded after receiving approval by the Planning and Zoning Commission that such plat meets all requirements of the City. Only fifty percent (50%) of the lots of an approved plat may be sold until the final blacktop coat is applied, at which time the remaining fifty percent (50%) of the lots may be sold.
(g) If building or construction has not begun on a plat within two years after approved by the Council, the plan must again be submitted to the Planning and Zoning Commission.
(h) Any developer or owner not conforming to the above rules and regulations shall have his license revoked and will not be permitted to build within the City until such time he is reinstated by the Zoning Administrator.
(Ord. 0-35-96. Passed 8-5-96.)