The regulations set forth in this section or set forth elsewhere in this chapter, when referred to in this section, are the regulations in the R-2 Two-Family Residential District.
(A) Use regulations. A building or premises shall be used only for the following purposes:
(1) A two-family dwelling;
(2) Any use permitted in the R-1A One-Family Residential District;
(3) Single-family residential attached. A single-family residential use in which one dwelling unit is located on a single lot and is attached by a common vertical wall to only one other adjacent dwelling unit on another single lot. Proposals for single-family attached dwellings must meet the following requirements:
(a) Dimensional requirements.
Minimum lot area | 3,000 square feet |
Minimum lot area per unit | 3,000 square feet |
Minimum lot width | 40 feet |
Minimum front yard | 25 feet |
Minimum rear yard | 25 feet |
Minimum side yard | 5 feet on the side opposite the zero lot line |
Maximum number of stories | 2-1/2 |
(b) Each dwelling unit shall be provided separate building access, shall face a public street, and shall have separate utility service from the street or rear lot line; and
(c) Submission requirements.
1. Site development plan that is in compliance with § 159.052(D)(2); and
2. Covenants and other documents to ensure the peculiar needs of attached housing are addressed.
(4) Trucks and commercial vehicles/equipment. No truck used for commercial purposes of one ton rated capacity or other type of commercial vehicular equipment shall be parked or stored on a lot in this district except when located in a garage or enclosed structure. This provision shall not apply to a bona fide agricultural use.
(C) Parking requirements. Off-street parking spaces shall be provided in accordance with the requirements for specific uses set forth in § 159.065.
(1999 Code, § 165.07) (Ord. 2247, passed 10-9-2001; Ord. 2296, passed 6-28-2005; Ord. 2352, passed 7-24-2007) Penalty, see § 159.999