(A) The lot size, width, depth, shape and orientation and the minimum building setback lines shall be appropriate for the location of the subdivision and for the type of development and use contemplated and shall not be less than those specified as minimum standards by Chapter 155, Zoning.
(B) Depth and width of properties reserved or laid out for commercial and industrial purposes shall be adequate to provide for the off-street service and parking facilities required by the type of use and development contemplated.
(C) Lots zoned for development of single-family and two-family dwellings shall front upon a public street. Exceptions may be permitted for lots zoned for condominium, townhouse and apartment developments, and commercial and industrial subdivisions when the access easement as required by § 154.045(B) has been provided.
(D) Double frontage and reverse frontage lots shall be avoided, except where essential to provide separation of residential development from traffic arteries or to overcome specific disadvantages of topography and orientation.
(E) Side lot lines shall be substantially at right angles or radial to street line unless other arrangements are approved by the Commission.
(F) Where the area is divided into larger lots than for normal urban building sites and, in the opinion of the Commission, any or all of the tracts are susceptible of being resubdivided, the original subdivision shall be such that the alignment of future street dedications may conform to the general street layout in the surrounding area and so that the larger tracts may be later subdivided in conformance with the requirements of this chapter and the minimum standards specified by Chapter 155, Zoning.
('68 Code, App. B, § 3.04) (Ord. 8-1989-34, passed 8-8-89)