(a) All related design calculations must be sealed by a N.C. professional engineer.
(b) Submit the following to the City of Claremont and obtain approval from the city's Public Works Department prior to beginning work:
(1) Affidavit of compliance. Affidavit shall attest that supplied products conform to the referenced standard and this specification and that tests set forth in each applicable referenced publication have been performed and that test requirements have been met. Submit for each of the following materials:
a. Pipe.
1. Pipe reinforced concrete pipe.
2. Corrugated Polyethylene (HDPE).
b. Pre-cast concrete manholes.
c. Pre-cast concrete boxes.
d. Concrete blocks.
(2) Catalog data. Submit manufacturer's standard drawings or catalog cuts for the following. Clearly indicate equipment to be furnished for the project including options to be provided.
a. Pipe.
1. Reinforced concrete pipe.
2. Corrugated Polyethylene (HDPE).
b. Pre-cast concrete manholes and the following appurtenances:
1. Manhole steps.
2. Pipe connectors.
3. Joint material.
4. Frames and covers.
5. Castings.
c. Pre-cast concrete boxes and the following appurtenances:
1. Manhole steps.
2. Pipe connectors.
3. Joint material.
4. Frames and covers.
5. Castings.
(3) Prior to final acceptance submit the following report:
a. Field test report for each section of pipe for the following:
1. Low-pressure air test for storm drain piping.
(Ord. of 11-7-16, No. 10-16)