(a) Engine generator.
(1) Install in accordance with manufacturer's instructions.
(2) Provide fuel system piping as recommended by generator set manufacturer.
(3) Provide wiring for fuel shutoff valve powered from generator set batteries and controlled by generator set control panel.
(4) Provide interconnecting wiring between generator control panel and pump control panel.
(5) Provide interconnecting wiring between generator control panel and telemetry system.
(6) Provide interconnecting wiring between generator control panel and automatic transfer switch for automatic start.
(7) Provide duplex receptacle, battery charger, alternator heater, and jacket heater branch circuits from an external source.
(b) Automatic transfer switch.
(1) Install transfer switch in accordance with manufacturer's instructions.
(2) Provide engraved plastic nameplates.
(3) Provide generator start/stop signal wiring and conduit from transfer switch to generator control panel.
(4) Provide interconnection wiring with duplex pump control circuit to allow only one pump to run while on generator power.
(5) Provide 120 volt power source for heater
(Ord. of 11-7-16, No. 10-16)