Publications are referred to in the text by basic designation only.
(a) American Society for Testing and Materials (ASTM).
(1) | A48 | Gray Iron Castings |
(2) | A126 | Gray Iron Castings and Valves, Flanges and Pipe Fittings |
(3) | A536 | Ductile Iron Castings |
(4) | C425 | Compression Joints for Vitrified Clay Pipe and Fittings |
(5) | C478 | Precast Reinforced Concrete Manhole Sections |
(6) | C890 | Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures |
(7) | C923 | Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes and Laterals |
(8) | C990 | Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Performed Flexible Joint Sealants |
(9) | C1244 | Test Method for Concrete Sewer Manholes by the Negative Air Pressure |
(10) | D698 | Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3)) |
(11) | D1248 | Polyethylene Plastics Molding and Extrusion Materials |
(12) | D1586 | Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils |
(13) | D1784 | Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds |
(14) | D1785 | Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80 &120 |
(15) | D2241 | Poly(Vinyl Chloride) (PVC) Pressure Rated Pipe (SDR Series) |
(16) | D2321 | Recommended Practice for Underground Installation of Flexible Thermoplastic Sewer Pipe |
(17) | D3034 | Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings |
(18) | D3139 | Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals |
(19) | F477 | Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
(20) | F794 | Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter |
(b) American Water Works Association (AWWA).
(1) | C104 | Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water |
(2) | C110 | Ductile-Iron and Gray-Iron Fittings, 3 inch through 48 inch, for Water and Other Liquids |
(3) | C115 | Flanged Ductile-Iron Pipe with Threaded Flanges |
(4) | C151 | Ductile-Iron Pipe, Centrifugally Cast in Metal Molds or Sand- Lined Molds, for Water or Other Liquids |
(5) | C153 | Ductile-Iron Compact Fittings, 3 inch through 16 inch, for Water and Other Liquids |
(6) | C504 | Rubber Seated Butterfly Valves |
(7) | C507 | Ball Valves, 6 inch through 48 inch |
(8) | C508 | Swing-Check Valves for Waterworks Service, 2 inch Through 24 inch NPS |
(9) | C509 | Resilient-Seated Gate Valves for Water Supply Service |
(10) | C512 | Air-Release, Air / Vacuum, and Combination Air Valves for Waterworks Service |
(11) | C515 | Reduced Wall, Resilient-Seated Gate Valves for Water Supply Services |
(12) | C550 | Protective Epoxy Interior Coatings for Valves and Hydrants |
(13) | C600 | Standard for Installation of Ductile Iron Water Mains and Their Appurtenances |
(14) | C605 | Underground Installation of Polyvinyl Chloride (PVC) Pressure Pipe and Fittings for Water |
(15) | C900 | Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 4 inch through 12 inch, for Water Distribution |
(16) | M23 | PVC Pipe - Design Installation |
(c) National Sanitation Foundation (NSF) Standards.
14 Plastic Piping Components and Related Materials.
(d) UNI-BELL Plastic Pipe Association (UNI).
(1) | B-5 | Recommended Practice for the Installation of Polyvinyl Chloride (PVC) Sewer Pipe |
(2) | B-6 | Recommended Practice |
(Ord. of 11-7-16, No. 10-16)