(A) In all new subdivisions or other developments where there are no existing town water mains, the developer shall install all 3/4- and/or 1-inch service connections simultaneously with the installation of water mains to the subdivision or development. Services of 1-1/2 inches and/or 2 inches may also be installed by the developer if approved by the Public Works Director.
(B) Services larger than 2 inches shall have a resilient seat shutoff valve with a valve box.
(C) In all new subdivisions or other developments where the developer installs the service connections and meter sets, application must be made to the Department, as otherwise provided in this code, for installation of water meters.
(D) All service connections shall be installed in full compliance with town standards and specifications. Only meter boxes and meter sets specified by the town may be installed. Any required pressure regulating valve shall be installed and tested by the contractor. The pressure regulating valve shall be maintained by the town utility customer.
(E) In the event a service connection must cross an Arizona Department of Transportation (“ADOT”) highway right-of-way, the customer shall obtain the necessary permits directly from ADOT and make the service connection through a licensed contractor. The service connection shall include the meter set and box and the service line from the meter box to the water main. The contractor shall install the water main tap and expose the water main. The town shall install the meter in the box.
(Ord. 04-578, passed 7-22-2004; Am. Ord. 2022-913, passed 2-22-2022)