Users are directed to adopt the following conservation measures.
(A) Indoor residential use.
(1) Conservation for voluntary and mandatory conservation phases.
(a) Use dishwashers only when they are full. Washing dishes by hand (do not let the tap run) saves about 25 gallons.
(b) Adjust water level on clothes washing machines, if possible. Use full loads only, if not adjustable.
(c) Turn off faucets while brushing teeth, etc. Saves about five gallons per day.
(d) Reduce water used per flush by installing toilet tank displacement inserts, a plastic jug may often be used as an alternative. DO NOT USE BRICKS as they disintegrate when soaked and the resulting grit hinders closing of the flap valve.
(e) Do not use the toilet as a trash can.
(f) Use sink and tub stoppers to avoid wasting water.
(g) Keep a bottle of chilled water in the refrigerator for drinking.
(h) Find and fix leaks in faucets and water-using appliances. Faucets can usually be fixed cheaply and quickly by replacing washers.
(i) Adapt plumbing with flow-restricting or other water-saving devices. These are usually inexpensive and easy to install.
(j) Learn to read your water meter so you can judge how much water you use and what difference conservation makes.
(k) Take shorter showers and shallow baths. Saves about 25 gallons.
(l) Reduce the number of toilet flushes per day. Each flush uses about five gallons (two to three gallons if you have water-saving toilets).
(m) Do not use a garbage disposal.
(n) Use non-phosphate detergent and save laundry water for lawns and plants.
(2) Conservation for emergency conservation or rationing phase. In addition to measures listed in division (A)(1) above.
(a) Turn off shower while soaping up;
(b) Use disposable eating utensils.
(B) Outdoor residential use.
(1) Conservation for normal conditions and voluntary conservation phase.
(a) Lawns.
1. Water before 10:00 a.m. to present evaporation which occurs during the hottest part of the day. Morning is better than evening, when the dampness encourages growth of fungus.
2. Water only when lawn shows signs of wilt. Grass that springs back when stepped on does not need water.
3. Water thoroughly, not frequently. Water long enough to soak roots, a light sprinkling evaporates quickly and encourages shallow root systems, Water slowly to avoid runoff.
4. Do not let the sprinkler run any longer than necessary. In an hour, 600 gallons can be wasted.
5. Allow maximum of one inch of water per week on your lawn. To measure, place cake tins outside to collect rain and water from sprinklers.
6. Use pistol-grip nozzles on hoses to avoid waste when watering flowers and shrubs.
7. Aerate lawns by punching holes six inches apart. This allows water to reach roots rather than run off surfaces.
8. Position sprinklers to water the lawn, not the pavement.
9. Avoid watering on windy days when the wind not only blows water off target, but also causes excess evaporation.
10. Keep sprinkler heads clean to prevent uneven watering.
11. Adjust hose to simulate a gentle rain. Sprinklers that produce a fine mist waste water through evaporation.
12. Know how to turn off an automatic sprinkler system in case of rain.
13. Use an alarm clock or stove timer to remind you to shut off sprinklers that do not have timers.
(b) Vegetable and flower gardens.
1. Water deeply, slowly and weekly. Most vegetables require moisture to a depth of six to eight inches.
2. Keep soil loose so water can penetrate easily.
3. Keep weeds out to reduce competition for water.
4. Put the water where you want it and avoid evaporation by using soil-soakers or slow-running hoses, not sprinklers.
(c) Trees and shrubs.
1. Water deeply using a soil-soaker or drip-irrigation.
2. Water only when needed. Check the depth of soil dryness by digging with a trowel.
3. Mulch to reduce evaporation, a two- to three-inch layer of wood chips, pine needles, grass clippings, or straw keeps the soil cool in summer.
4. Dig troughs around plants to catch and retain water.
5. Water trees growing in full sun more often than those in shade.
6. Do not use sprinklers. Apply water directly at base.
7. Do not fertilize during the summer. Fertilizing increases a plant's need for water.
8. Postpone planting until fall or spring when there is generally less need for water.
9. Install trickle-drip irrigation systems close to the roots of your plants. By dripping water slowly, the system doesn't spray water in to the air. Use soil probes for large trees.
10. Water when cloudy, at night, or even when a light rain is falling.
(2) Conservation for voluntary conservation phase (in addition to measures listed in division (B)(1) above.
(a) Do not allow children to play with hose or sprinklers.
(b) Limit car washing.
(c) Be ready to catch rainfall that occurs. Place containers under drain spouts.
(d) Use leftover household water if available.
(e) Consider delaying the seeding or sodding of new lawns.
(f) Determine the amount of water being used outdoors by comparing water bills for summer and winter.
(3) Conservation for mandatory conservation phase (in addition to measures listed in divisions (B)(1) and (2) above).
(a) Vegetable gardens and food trees should be given minimal amounts of water on an individual basis only.
(b) Do not water lawns and inedible plants.
(c) Do not use sprinklers.
(4) Emergency conservation. Most outdoor watering is prohibited under emergency conservation conditions.
(C) Commercial uses.
(1) Reduce laundry usage or services by changing bed linens, etc. only when necessary to preserve the health of patients or residents.
(2) Use disposable food service items.
(3) Identify and repair all leaky fixtures and water-using equipment. Give special attention to equipment connected directly to water lines, such as processing machines, steam-using machines, washing machines, water-cooled air conditioners, and furnaces.
(4) Assure that valves and solenoids that control water flows are shut off completely when the water-using cycle is not engaged.
(5) Adjust water-using equipment to use the minimum amount of water required to achieve its stated purpose.
(6) Shorten rinse cycles for laundry machines as much as possible; implement lower water levels wherever possible.
(7) For processing, cooling, and other uses, either re-use water or use water from sources that would not adversely affect public water supplies.
(8) Advise employees, students, customers, and other users not to flush toilets after every use. Install toilet tank displacement inserts; place flow restrictors in shower heads and faucets; close down automatic flushes overnight.
(9) Install automatic flushing valves to use as little water as possible or to cycle at longer intervals.
(10) Place water-saving posters and literature where employees, students, customers, etc. will have access to them.
(11) Check meters on a frequent basis to determine consumptive patterns.
(12) Review usage patterns to see where other savings can be made.
(Ord. passed 9-18-2008; Am. Ord. passed 7-17-2010; Am. Ord. passed 2-23-2018)