Loading...
(A) All vehicles other than bicycles, including animal-drawn vehicles and vehicles referred to in R.C. § 4513.02(G), not specifically required to be equipped with lamps or other lighting devices by R.C. §§ 4513.03 through 4513.10, or any substantially equivalent municipal ordinances, shall, at the times specified in R.C. § 4513.03 or a substantially equivalent municipal ordinance, be equipped with at least one lamp displaying a white light visible from a distance of not less than 1,000 feet to the front of the vehicle and also shall be equipped with two lamps displaying red light visible from a distance of not less than 1,000 feet to the rear of the vehicle, or as an alternative, one lamp displaying a red light visible from a distance of not less than 1,000 feet to the rear and two red reflectors visible from all distances of 600 feet to 100 feet to the rear when illuminated by the lawful lower beams of headlamps. Lamps and reflectors required by this section shall meet standards adopted by the Director of Public Safety.
(B) All boat trailers, farm machinery and other machinery, including all road construction machinery, upon a street or highway, except when being used in actual construction and maintenance work in an area guarded by a flagperson, or where flares are used, or when operating or traveling within the limits of a construction area designated by the Director of Transportation, a city or village engineer, or the county engineer of the several counties, when such construction area is marked in accordance with requirements of the Director and the Manual and Specifications for a Uniform System of Traffic-Control Devices, as set forth in R.C. § 4511.09, which is designed for operation at a speed of 25 miles per hour or less, shall be operated at a speed not exceeding 25 miles per hour, and shall display a triangular slow-moving vehicle emblem (SMV). The emblem shall be mounted so as to be visible from a distance of not less than 500 feet to the rear. The Director of Public Safety shall adopt standards and specifications for the design and position of mounting the SMV emblem. The standards and specifications for SMV emblems referred to in this section shall correlate with and, so far as possible, conform with those approved by the American Society of Agricultural Engineers. A unit of farm machinery that is designed by its manufacturer to operate at a speed greater than 25 miles per hour may be operated on a street or highway at a speed greater than 25 miles per hour provided it is operated in accordance with this section. As used in this division, MACHINERY does not include any vehicle designed to be drawn by an animal.
(C) The use of the SMV emblem shall be restricted to animal-drawn vehicles and to the slow-moving vehicles specified in division (B) of this section operating or traveling within the limits of the highway. Its use on slow-moving vehicles being transported upon other types of vehicles or on any other type of vehicle or stationary object on the highway is prohibited.
(D) (1) No person shall sell, lease, rent or operate any boat trailer, farm machinery or other machinery defined as a slow-moving vehicle in division (B) of this section, except those units designed to be completely mounted on a primary power unit, which is manufactured or assembled on or after April 1, 1966, unless the vehicle is equipped with a slow-moving vehicle emblem mounting device as specified in division (B) of this section.
(2) No person shall sell, lease, rent, or operate on a street or highway any unit of farm machinery that is designed by its manufacturer to operate at a speed greater than 25 miles per hour unless the unit displays a slow-moving vehicle emblem as specified in division (B) of this section and a speed identification symbol that meets the specifications contained in the American Society of Agricultural Engineers Standard ANSI/ASAE S584 JAN2005, Agricultural Equipment: Speed Identification Symbol (SIS).
(E) Any boat trailer, farm machinery or other machinery defined as a slow-moving vehicle in division (B) of this section, in addition to the use of the slow-moving vehicle emblem, and any unit of farm machinery that is designed by its manufacturer to operate at a speed greater than 25 miles per hour, in addition to the display of a speed identification symbol, may be equipped with a red flashing light that shall be visible from a distance of not less than 1,000 feet to the rear at all times specified in R.C. § 4513.03 or a substantially equivalent municipal ordinance. When a double-faced light is used, it shall display amber light to the front and red light to the rear. In addition to the lights described in this division, farm machinery and motor vehicles escorting farm machinery may display a flashing, oscillating or rotating amber light, as permitted by R.C. § 4513.17 or a substantially equivalent municipal ordinance, and also may display simultaneously flashing turn signals or warning lights, as permitted by that section.
(F) (1) Every animal-drawn vehicle upon a street or highway shall at all times be equipped in one of the following ways:
(a) With a slow-moving vehicle emblem complying with division (B) of this section;
(b) With alternate reflective material complying with rules adopted under division (F)(2) below;
(c) With both a slow-moving vehicle emblem and alternate reflective material as specified in division (F)(2) below.
(2) Rules adopted by the Director of Public Safety, subject to R.C. Chapter 119, establishing standards and specifications for the position of mounting of the alternate reflective material authorized by this division, permit, as a minimum, the alternate reflective material to be black, gray, or silver in color. The alternate reflective material shall be mounted on the animal-drawn vehicle so as to be visible, at all times specified in R.C. § 4513.03 or a substantially equivalent municipal ordinance, from a distance of not less than 500 feet to the rear when illuminated by the lawful lower beams of headlamps.
(G) (1) Every unit of farm machinery that is designed by its manufacturer to operate at a speed greater than 25 miles per hour shall display a slow-moving vehicle emblem and a speed identification symbol that meets the specifications contained in the American Society of Agricultural Engineers Standard ANSI/ASAE S584 JAN2005, Agricultural Equipment: Speed Identification Symbol (SIS) when the unit is operated upon a street or highway, irrespective of the speed at which the unit is operated on the street or highway. The speed identification symbol shall indicate the maximum speed in miles per hour at which the unit of farm machinery is designed by its manufacturer to operate. The display of the speed identification symbol shall be in accordance with the standard prescribed in this division.
(2) If an agricultural tractor that is designed by its manufacturer to operate at a speed greater than 25 miles per hour is being operated on a street or highway at a speed greater than 25 miles per hour and is towing, pulling, or otherwise drawing a unit of farm machinery, the unit of farm machinery shall display a slow-moving vehicle emblem and a speed identification symbol that is the same as the speed identification symbol that is displayed on the agricultural tractor.
(H) When an agricultural tractor that is designed by its manufacturer to operate at a speed greater than 25 miles per hour is being operated on a street or highway at a speed greater than 25 miles per hour, the operator shall possess some documentation published or provided by the manufacturer indicating the maximum speed in miles per hour at which the manufacturer designed the agricultural tractor to operate.
(I) As used in this section, BOAT TRAILER means any vehicle designed and used exclusively to transport a boat between a place of storage and a marina, or in and around a marina, when drawn or towed on a street or highway for a distance of no more than ten miles and at a speed of 25 miles per hour or less.
(R.C. § 4513.11) ('73 Code, § 71.02)
(J) Lights and reflector requirements for multi-wheel agricultural tractors or farm machinery.
(1) (a) Every multi-wheel agricultural tractor whose model year was 2001 or earlier, when being operated or traveling on a street or highway at the times specified in R.C. § 4513.03, or a substantially equivalent municipal ordinance, at a minimum shall be equipped with and display reflectors and illuminated amber lamps so that the extreme left and right projections of the tractor are indicated by flashing lamps displaying amber light, visible to the front and the rear; by amber reflectors, all visible to the front; and by red reflectors, all visible to the rear.
(b) The lamps displaying amber light need not flash simultaneously and need not flash in conjunction with any directional signals of the tractor.
(c) The lamps and reflectors required by division (J)(1)(a) of this section and their placement shall meet standards and specifications contained in rules adopted by the Director of Public Safety in accordance with R.C. Chapter 119. The rules governing the amber lamps, amber reflectors, and red reflectors and their placement shall correlate with and, as far as possible, conform with paragraphs 4.1.4.1, 4.1.7.1, and 4.1.7.2, respectively, of the American Society of Agricultural Engineers Standard ANSI/ASAE S279.10 OCT98, Lighting and Marking of Agricultural Equipment on Highways.
(2) Every unit of farm machinery whose model year was 2002 or later, when being operated or traveling on a street or highway at the times specified in R.C. § 4513.03, or a substantially equivalent municipal ordinance, shall be equipped with and display markings and illuminated lamps that meet or exceed the lighting, illumination, and marking standards and specifications that are applicable to that type of farm machinery for the unit’s model year specified in the American Society of Agricultural Engineers Standard ANSI/ASAE S279.11 APR0, Lighting and Marking of Agricultural Equipment on Highways, or any subsequent revisions of that standard.
(3) The lights and reflectors required by division (J)(1) of this section are in addition to the slow-moving vehicle emblem and lights required or permitted by R.C. § 4513.11 or 4513.17, or a substantially equivalent municipal ordinance, to be displayed on farm machinery being operated or traveling on a street or highway.
(4) No person shall operate any unit of farm machinery on a street or highway or cause any unit of farm machinery to travel on a street or highway in violation of divisions (J)(1) or (J)(2) of this section.
(R.C. § 4513.111)
(K) Whoever violates this section is guilty of a minor misdemeanor.
(R.C. §§ 4513.11(I), 4513.111(E))
(A) (1) When the Director of Public Safety prescribes and promulgates regulations relating to clearance lights, marker lights, reflectors and stop lights on buses, trucks, commercial tractors, trailers, semitrailers and pole trailers, when operated upon any highway, these vehicles shall be equipped as required by such regulations, and such equipment shall be lighted at all times mentioned in R.C. § 4513.03 or a substantially equivalent municipal ordinance, except that clearance lights and side marker lights need not be lighted on any such vehicle when it is operated within the municipality where there is sufficient light to reveal any person or substantial object on the highway at a distance of 500 feet.
(2) Such equipment shall be in addition to all other lights specifically required by R.C. §§ 4513.03 through 4513.16, or any substantially equivalent municipal ordinances.
(3) Vehicles operated under the jurisdiction of the Public Utilities Commission are not subject to this section.
(B) Whoever violates this section is guilty of a minor misdemeanor.
(R.C. § 4513.07) ('73 Code, § 71.01)
(A) It is unlawful to operate snow removal equipment on a highway unless the lights thereon comply with and are lighted when and as required by the standards and specifications adopted by the Director of Transportation pursuant to R.C. § 4513.18.
(B) Whoever violates this section is guilty of a minor misdemeanor.
(R.C. § 4513.18)
(A) No person shall operate any motor vehicle owned, leased, or hired by a nursery school, kindergarten, or day-care center, while transporting preschool children to or from such an institution unless the motor vehicle is equipped with and displaying two amber flashing lights mounted on a bar attached to the top of the vehicle, and a sign bearing the designation “caution — children,” which shall be attached to the bar carrying the amber flashing lights in such a manner as to be legible to persons both in front of and behind the vehicle. The lights and sign shall meet standards and specifications adopted by the Director of Public Safety.
(B) No person shall operate a motor vehicle displaying the lights and sign required by this section for any purpose other than the transportation of preschool children as provided in this section.
(R.C. § 4513.182)
(C) Whoever violates this section is guilty of a minor misdemeanor.
(R.C. § 4513.99)
BRAKES
(A) The following requirements govern as to brake equipment on vehicles:
(1) Every motor vehicle, other than a motorcycle, when operated upon a highway shall be equipped with brakes adequate to control the movement of and to stop and hold the motor vehicle, including two separate means of applying the brakes, each of which means shall be effective to apply the brakes to at least two wheels. If these two separate means of applying the brakes are connected in any way, then on such motor vehicles, manufactured or assembled after January 1, 1942, they shall be so constructed that failure of any one part of the operating mechanism shall not leave the motor vehicle without brakes on at least two wheels.
(2) Every motorcycle, when operated upon a highway shall be equipped with at least one adequate brake, which may be operated by hand or by foot.
(3) Every motorized bicycle shall be equipped with brakes meeting the rules adopted by the Director of Public Safety under R.C. § 4511.521.
(4) When operated upon the highways, the following vehicles shall be equipped with brakes adequate to control the movement of and to stop and to hold the vehicle, designed to be applied by the driver of the towing motor vehicle from its cab, and also designed and connected so that, in case of a breakaway of the towed vehicle, the brakes shall be automatically applied:
(a) Except as otherwise provided in this section, every trailer or semitrailer, except a pole trailer, with an empty weight of 2,000 pounds or more, manufactured or assembled on or after January 1, 1942;
(b) Every manufactured home or travel trailer with an empty weight of 2,000 pounds or more, manufactured or assembled on or after January 1, 2001.
(5) Every watercraft trailer with a gross weight or manufacturer’s gross vehicle weight rating of 3,000 pounds or more that is manufactured or assembled on or after January 1, 2008, shall have separate brakes equipped with hydraulic surge or electrically operated brakes on two wheels.
(6) In any combination of motor-drawn trailers or semitrailers equipped with brakes, means shall be provided for applying the rearmost brakes in approximate synchronism with the brakes on the towing vehicle, and developing the required braking effort on the rearmost wheels at the fastest rate; or means shall be provided for applying braking effort first on the rearmost brakes; or both of the above means, capable of being used alternatively, may be employed.
(7) Every vehicle and combination of vehicles, except motorcycles and motorized bicycles, and except trailers and semitrailers of a gross weight of less than 2,000 pounds, and pole trailers, shall be equipped with parking brakes adequate to hold the vehicle on any grade on which it is operated, under all conditions of loading, on a surface free from snow, ice, or loose material. The parking brakes shall be capable of being applied in conformance with the foregoing requirements by the driver’s muscular effort or by spring action or by equivalent means. Their operation may be assisted by the service brakes or other source of power provided that failure of the service brake actuation system or other power assisting mechanism will not prevent the parking brakes from being applied in conformance with the foregoing requirements. The parking brakes shall be so designed that when once applied they shall remain applied with the required effectiveness despite exhaustion of any source of energy or leakage of any kind.
(8) The same brake drums, brake shoes and lining assemblies, brake shoe anchors, and mechanical brake shoe actuation mechanism normally associated with the wheel brake assemblies may be used for both the service brakes and the parking brakes. If the means of applying the parking brakes and the service brakes are connected in any way, they shall be so constructed that failure of any one part shall not leave the vehicle without operative brakes.
(9) Every motor vehicle or combination of motor-drawn vehicles shall, at all times and under all conditions of loading, be capable of being stopped on a dry, smooth, level road free from loose material, upon application of the service or foot brake, within the following specified distances, or shall be capable of being decelerated at a sustained rate corresponding to these distances:
(a) Vehicles or combinations of vehicles having brakes on all wheels shall come to a stop in 30 feet or less from a speed of 20 miles per hour.
(b) Vehicles or combinations of vehicles not having brakes on all wheels shall come to a stop in 40 feet or less from a speed of 20 miles per hour.
(10) All brakes shall be maintained in good working order and shall be so adjusted as to operate as equally as practicable with respect to the wheels on opposite sides of the vehicle.
(R.C. § 4513.20) ('73 Code, § 71.15)
(B) Whoever violates this section is guilty of a minor misdemeanor.
(R.C. § 4513.99)
(A) No hydraulic brake fluid for use in motor vehicles shall be sold in this municipality if the brake fluid is below the minimum standard of specifications for heavy duty type brake fluid established by the society of automotive engineers and the standard of specifications established by 49 C.F.R. 571.116, as amended.
(B) All manufacturers, packers, or distributors of brake fluid selling such fluid in this municipality shall state on the containers that the brake fluid meets or exceeds the applicable minimum SAE standard of specifications, and the standard of specifications established in 49 C.F.R. 571.116, as amended.
(R.C. § 4513.201)
(C) Whoever violates this section is guilty of a minor misdemeanor.
(R.C. § 4513.99)
Loading...