Loading...
§§ 82-360 -- 82-375 RESERVED.
ARTICLE XVIII. I-2 GENERAL INDUSTRIAL DISTRICT
General Industrial Districts are designed primarily for manufacturing, assembling and fabrication activities, including large scale or specialized industrial operations, whose external physical effects will be felt to some degree by surrounding districts. The I-2 District is so structured as to permit the manufacturing, processing and compounding of semifinished or finished products from raw materials as well as from previously prepared material.
(1993 Code, § 82-376) (Ord. passed 10-12-1992)
In a General Industrial District, no building or land shall be used and no building shall be erected except for 1 or more of the following specified uses unless otherwise provided in this chapter.
(1) Any use first permitted and as regulated in an I-1 District.
(2) Heating and electric power generating plants.
(3) Any of the following production or manufacturing uses, not including storage of finished products, provided that they are located not less than 800 feet distant from any residential district and not less than 300 feet distant from any other district:
(a) Junk yards, provided such are entirely enclosed within a building or within an eight- foot obscuring wall;
(b) Incineration of garbage or refuse when conducted within an approved and enclosed incinerator plant;
(c) Blast furnace, steel furnace, blooming or rolling mill;
(d) Manufacture of corrosive acid or alkali, cement, lime, gypsum or plaster of Paris;
(e) Petroleum or other inflammable liquids; production, refining or storage;
(f) Smelting of copper, iron or zinc ore.
(4) Any other use which shall be determined by the city, after recommendation from the Planning Commission, to be of the same general character as the above permitted uses in § 82-377. The city may impose any required setback and/or performance standards so as to insure public health, safety and general welfare.
(5) Accessory buildings and uses customarily incidental to any of the permitted uses listed in this section.
(1993 Code, § 82-377 ) (Ord. passed 10-12-1992)
See §§ 82-426 et seq., schedule of regulations, limiting the height and bulk of buildings, the minimum size of lot by permitted land use and the minimum yard setback requirements.
(1993 Code, § 82-378) (Ord. passed 10-12-1992)
Loading...