Skip to code content (skip section selection)
Compare to:
Chapter 6:   DIMENSIONAL STANDARDS AND MEASUREMENTS
6.1   TABLES OF DENSITY AND DIMENSIONAL STANDARDS
   6.1.1   Residential Districts (not including TC District)
   (A) Table of Density and Dimensional Standards
   (B) Additional Regulations
   6.1.2   Non-Residential Districts (not including TC District and CT District)
   6.1.3   Town Center District
   (A) Table of Density and Dimensional Standards
   (B) Additional Regulations
   6.1.4   Corridor Transition District
6.2   LOT MEASUREMENT AND REQUIREMENTS
   6.2.1   Definitions/Measurements
   (A) Lot Area
   (B) Lot Width
   (C) Lot Depth
   6.2.2   General Lot Requirements
   (A) Minimum Lot Dimensions
   (B) Number of Principal Buildings or Uses Per Lot
   (C) Distance From Existing Telecommunications Facilities Towers
6.3   SETBACK MEASUREMENT AND REQUIREMENTS
   6.3.1   Definition/Measurement
   (A) Setback Line
   (B) Setback, Roadway
   (C) Setback, Rear
   (D) Setback, Side
   (E) Setback, Front
   (F) Setback Measurement, Cul-de-Sac
   (G) General Guidelines for Determining Residential Setbacks
   (H) Guidelines for Determining Residential Setbacks within Planned Developments
   6.3.2   Setback Requirements
   (A) General Requirements
   (B) [Reserved]
   (C) Setbacks from Required Buffers and Streetscapes
   (D) Features Allowed within Required Setbacks or Yards
   6.3.3   Clear Sight Triangles
   6.3.4   Exemptions
6.4   HEIGHT MEASUREMENT AND REQUIREMENTS
   6.4.1   Definition/Measurement
   (A) Building Height
   (B) Exceptions
   6.4.2   General Height Regulations
   (A) General Increases to Maximum Height Requirement
   (B) Telecommunications Facilities
6.5   BULK MEASUREMENT AND REQUIREMENTS
   6.5.1   Measurements
   (A) Density, Gross
   (B) Density, Net
   (C) Floor Area
   (D) Building Footprint