(A) Improvement plans shall consist of black or blue line prints not larger than 36 square inches.
(B) These plans and the related specifications shall provide all of the following information:
(1) Topography of the tract, both before and after development at the same scale as the approved preliminary plat;
(2) Existing and proposed elevations along the centerline of all streets;
(3) Radii of all curves and lengths of tangents on all streets;
(4) Locations and typical cross-section of street pavements including curbs/gutters, catch basins and inlets;
(5) Locations and typical cross section of sidewalks and driveway aprons;
(6) Locations, sizes and invert elevations of all existing and proposed sanitary sewers, storm sewers and fire hydrants, showing connections to any existing or proposed utility systems;
(7) Locations and sizes of all water, gas, electric and other utilities;
(8) Locations of street lighting standards and street signs;
(9) One or more benchmarks, when requested by Engineer, in or near the subdivision, to which the subdivision is referenced; the identity and elevation shall be based on sea level datum;
(10) All proposed measures to control erosion and sedimentation;
(11) High water elevations of all lakes/streams adjoining or within the tract;
(12) Such other information as the City Engineer may reasonably require to perform his or her duties under this section; and
(13) Existing and proposed survey monuments on street plans or on the proposed final plat as required by this chapter.
(Prior Code, § 34-3-9)