Off-street parking areas shall conform to the regulations of Chapter 1284 and to the parking requirements specified in Table 1270.11 below.
(a) Table 1270.11 Minimum Parking Setbacks. Off-street parking shall be located in compliance with the minimum setbacks, measured from the street right-of-way or property line, as specified below unless otherwise noted.
MINIMUM PARKING SETBACKS | ||||
M-1 Office/ Limited Manufac- turing | M-2 General Manufac- turing | M-3 Urban Manufac- turing | M-4 Open Space/ Heavy Manufac- turing | |
(1) Minimum Setback from Street ROW | Behind front building line1 | 25 feet1 | 10 feet | 40 feet |
(2) Setback from side and rear lot line abutting nonresidential district | 10 feet | 10 feet | 8 feet | 20 feet |
(3) Setback from side and rear lot line abutting residential district | 50 feet | 50 feet | 25 feet | 100 feet |
Notes to Table 1270.11: 1 Except when lot is part of a new industrial subdivision and fronts on a new interior street, then the minimum setback shall be 20 feet. | ||||
(b) The area within the parking setback shall be landscaped in accordance with Chapter 1280, Landscaping and Land Use Buffers.
(c) In M-1, M-2 and M-3 Districts, loading and service areas shall be located in the rear or side yard, shall comply with the parking setbacks set forth in Table 1270.11 and shall be screened in accordance with the provisions set forth in Chapter 1280, Landscaping and Land Use Buffers.
(Ord. 8-13. Passed 5-14-13.)