Monuments shall be placed at all block corners, angle points, points of curves in streets, and at intermediate points as specified as follows:
A. At extreme corners of the subdivision such monuments shall be concrete cylinders, cut stone or rectangular prisms or other material approved by the planning commission not less than four inches (4") in diameter or square, and forty eight inches (48") long.
B. At all street corners, at all points where street boundary lines intersect the plat boundary lines and at all angle points and points of curve in each street, such markers shall be steel rods not less than three-fourths inch (3/4") in diameter and forty eight inches (48") long.
C. At all lot corners, markers shall be any standard commercially manufactured cap bearing the registration number of the land surveyor responsible for its placement, said cap to be placed on a steel rod of not less than one-half inch (1/2") in diameter, and thirty inches (30") in length. (Ord. 2013-20)