§ 6.8 DIMENSIONAL STANDARDS.
   6.8.1   Purpose. The purpose of this section is to present the dimensional standards for all principal and accessory structures and uses allowed in this ordinance. These standards may be further modified by other requirements found in other articles where applicable.
   6.8.2   Dimensional standards table. Unless otherwise specified, all principal and accessory structures in the Base Zoning Districts are subject to the dimensional standards set forth in Table 6-1, Dimensional Standards.
Table 6-1 Dimensional Standards
Base Zoning District
Minimum Lot Size (sq. ft.)
Maximum Height (feet)
Minimum Lot Width (feet)
Minimum Setback (feet)
Front/ Corner Side
Each Side
Rear
Table 6-1 Dimensional Standards
Base Zoning District
Minimum Lot Size (sq. ft.)
Maximum Height (feet)
Minimum Lot Width (feet)
Minimum Setback (feet)
Front/ Corner Side
Each Side
Rear
Central Business (CB)
10,000
35
50
15
0
20
Heavy Industrial (HI)
80,000
80 2
200
80
50
50
Highway Business (HB)
25,000
50
100
35
15
20
Light Industrial (LI)
40,000
50 2
150
40
35
40
Mixed Residential (RMX)
10,000
35
75
30 1
10
25
Multi-Family Residential (RMF)
2 Acres
35
150
15
10
20
Neighborhood Business (NB)
10,000
35
100
15
5
20
Office and Institutional (OI)
10,000
35
100
15
5
20
Rural Preservation (RP)
80,000
35
200
50
20
35
Rural Residential (RR)
40,000
35
120
40
15
35
Suburban Residential (RS)
15,000
35
100
35
12.5
30
Town Residential (RT)
12,500
35
85
30 1
10
25
1 - Prevailing street setback (6.5.10) regulations apply.
2 - This height limit applies only to the occupiable portions of structures in the LI and HI Districts. Unoccupied storage silos and unenclosed machinery would not be considered occupiable structures. A structure is considered occupied if one or more persons regularly occupy any part of the structure. Periodic maintenance of a structure that is not otherwise regularly occupied shall not be considered regular occupancy.
 
(Ord. A.23.04, passed 4-6-2023; Ord. A.23.07, passed 9-7-2023)