(A) When a drive-in establishment adjoins property located in any residential district, an ornamental masonry wall 5 feet in height shall be erected and maintained along the interior line, or if separated from the residential zone by an alley, there along the alley lot line. In addition, all outside trash areas shall be enclosed by the 5-foot masonry wall. This wall shall be protected from possible damage inflicted by vehicles using the parking area by means of pre-cast concrete wheel stops at least 6 inches in height, or by firmly implanted bumper guards not attached to the wall, or by other suitable barriers.
(B) The entire parking area shall be paved with a permanent surface of concrete or asphaltic cement. Any unpaved area of the site shall be landscaped with lawn or other horticultural materials, maintained in a neat and orderly fashion at all times, and separated from the paved area by a raised curb or other equivalent barrier.
(C) Lighting shall be installed in a manner which will not create a driving hazard on abutting streets or which will not cause direct illumination on adjacent residential properties.
(D) Before approval is given for any use, a site plan shall first be submitted to the Board of Zoning Appeals for review as to suitability of location of entrances and exits to the site, parking area, screening, lighting, and other design features.