(A) Number of Dwellings. Each single-family or two-family dwelling shall have a separate lot. Two- family dwellings shall be arranged so that no dwelling unit shall be located to the rear of another dwelling unit upon the same lot.
(B) Lot Area. Each lot upon which a dwelling is to be constructed shall have a minimum of 30,000 square feet of land area.
(C) Street Frontage. Each dwelling(s) shall be placed so that the front elevation faces only the dedicated street. Each lot shall have frontage upon a duly dedicated and accepted street. Each lot upon which a dwelling is to be constructed shall have the driveway access street frontage that abuts the lot.
(D) Lot Width. Each lot that is 30,000 square feet or larger, upon which a dwelling is to be constructed, shall have a minimum lot width of 125 feet. The minimum lot width shall be measured at the setback line, which is 50 feet from the (front) street (property) line to the nearest foundation wall. (See §§ 1260.04
and 1268.03
(A).)
(E) Previously Platted Lots. A dwelling may be constructed on any lot that existed prior to the adoption date of this section (Ordinance 70-00, passed November 6, 2000), provided that such lot complies with the following. Only one single-family or two-family dwelling shall be located upon the lot and no dwelling shall be located to the rear of another dwelling upon the same lot. The lots shall have a frontage upon a dedicated and accepted street of not less than 100 feet, measured at the front building setback line established for it, or as shown on the subdivision plat, measured from, and at right angles to, the side line of the street or road, and shall contain not less than 20,000 square feet in those areas of the city where public water facilities are available. In addition, said lot shall meet the minimum yard requirements of § 1268.03
.
(Ord. 143-02, passed 10-7-2000; Ord. 70-00, passed 11-6-2000; Ord. 27-16, passed 4-4-2016; Ord. 45-2021, passed 9-20-2021)