The Table of Development Standards accompanies the Table of Uses. This table identifies the maximum residential density allowed, required setback and yard standards, building height standards, site coverage standards and other requirements for the uses allowed within each zoning district.
Table of Development Standards | |||||
Required Development Standards for All Principal Buildings | |||||
Site Development Requirement | Zoning District | ||||
GMU | LDR | MDR | HDR | C |
Table of Development Standards | |||||
Required Development Standards for All Principal Buildings | |||||
Site Development Requirement | Zoning District | ||||
GMU | LDR | MDR | HDR | C | |
Lot required | Principal buildings shall be on a lot, as defined by this chapter | ||||
Maximum allowed residential density | 1 dwelling unit per 5 acres | 1 dwelling unit per 5 acres | 1 dwelling unit per 2.5 acres | 1 dwelling unit per 1 acre | Lot size sufficient to meet all site requirements of this chapter |
Maximum building height | 2.5 stories or 30 feet | 2.5 stories or 30 feet | 2.5 stories or 30 feet | 2.5 stories or 30 feet | 2.5 stories or 30 feet |
Minimum front yard | 30 feet | 30 feet | 30 feet | 30 feet | 30 feet |
Minimum lot width | 1/3 of lot depth | 1/3 of lot depth | 1/3 of lot depth | 1/3 of lot depth | 1/3 of lot depth |
Minimum lot size required | 5 acres | 5 acres | 2.5 acres | 1 acre | No requirement |
Minimum rear yard | 30 feet | 30 feet | 30 feet | 30 feet | 30 feet |
Minimum side yard | 10 feet | 10 feet | 10 feet | 10 feet | 30 feet, if located adjacent to a residential use or residential zone; otherwise, as allowed by the International Building Code (IBC) |
Permanent foundation | Principal buildings must be located on a site-built permanent foundation which meets the International Building Code (IBC) and all other codes, or, if a manufactured home, meets the requirements for manufactured housing installations | ||||
Utilities | Principal buildings shall be permanently connected to and approved for all required utilities | ||||
Required Development Standards for Accessory Buildings | |||||
Maximum size | 1,000 square feet | 1,000 square feet | 1,000 square feet | 1,000 square feet | 1,000 square feet |
Minimum front yard | 30 feet | 30 feet | 30 feet | 30 feet | 30 feet |
Minimum rear yard | Must meet the requirements of the International Building Code (IBC) | Must meet the requirements of the International Building Code (IBC) | Must meet the requirements of the International Building Code (IBC) | Must meet the requirements of the International Building Code (IBC) | Must meet the requirements of the International Building Code (IBC) |
Minimum side yard | Must meet the requirements of the International Building Code (IBC) | Must meet the requirements of the International Building Code (IBC) | Must meet the requirements of the International Building Code (IBC) | Must meet the requirements of the International Building Code (IBC) | Must meet the requirements of the International Building Code (IBC) |
Total maximum lot coverage (principal, plus accessory buildings) | 20% | 20% | 30% | 40% | 50% |
(Ord. 46, passed 8-28-2001; Ord. 50, passed 7-2-2003; Ord. 21D, passed 1-7-2004; Ord. 59, passed 5-8-2008, § 605; Ord. 2022-1, 6-2-2022)