§ 153.118 TABLE OF DEVELOPMENT STANDARDS.
   The standards adopted in this table apply to all lots, parcels, buildings, structures, and uses unless they are specifically exempted by other requirements of this Code.
Development Standards
Zoning Districts
GMU
LDR
MDR
HDR
C
Development Standards
Zoning Districts
GMU
LDR
MDR
HDR
C
   Density Standards (see note)
Minimum Lot Size without Averaging
5 acres
5 acres
2.5 acres
1 acre
Average Building Lot Size
5 acres
5 acres
Averaging not permitted
Minimum Building Lot Size, Well
1 acre
1 acre
Minimum Building Lot Size, Central Water
1 acre
1 acre
These minimum building lot sizes for the GMU and LDR may be used ONLY when lot size averaging is used.
Maximum Lot Coverage
20%
20%
30%
40%
   Dimensional Standards, Principal Buildings
Maximum Building Height
30 ft
Minimum Front Setback
30 ft.
See note
Minimum Rear Setback
30 ft.
Minimum Side Setback
10 ft.
   Dimensional Standards, Accessory Buildings
Maximum Building Size
1,000 SF
See note
Maximum Building Height
30 ft
Minimum Front Setback
30 ft.
See note
Minimum Rear Setback
30 ft.
Minimum Side Setback
10 ft
Note:
1.   With the exception of the maximum building height, the dimensions of commercial development will usually be controlled by the need to comply with the standards of § 153.415 or § 153.430. Where compliance with those standards does not result in a larger setback or a lower lot coverage, commercial uses must comply with the standards established here for the LDR.
 
(Ord. 46, passed 8-28-2001; Ord. 50, passed 7-2-2003; Ord. 21D, passed 1-7-2004; Ord. 59, passed 5-8-2008, § 605; Ord. 2022-1, 6-2-2022; Ord. 2024-1, passed - -2024)