(A) Connection to the town sanitary sewer system where available; otherwise, an approved septic tank;
(B) All fixtures operable;
(C) No broken water closet bowls;
(D) Water closet not loose or leaking;
(E) No leaks in shower stall floor;
(F) No hopper or vogel bowl toilets;
(G) Adequate facilities for furnishing hot water to each tub or shower, lavatory and kitchen sink;
(H) Installed water supply inside building for each dwelling unit;
(I) Installed water closet, tub or shower, lavatory and sink for each dwelling unit. Kitchen sink at least 12 inches by 16 inches by six inches deep;
(J) Separate toilet facilities for each dwelling unit;
(K) Toilet and bathing facilities protected from the weather;
(L) All water piping protected from freezing by proper installation in protected space;
(M) At least three inches minimum size main vent properly installed for each building. Exception: when a less restrictive main vent size is approved by the State Plumbing Code, it shall also be approved by this chapter;
(N) Soil and water lines properly supported with no broken or leaking lines; and
(O) Every water closet compartment, floor surface and bathroom floor surface so constructed or finished as not to permit the entrance or passage of water.
(Ord. PL05268-110121, passed 12-8-2021) Penalty,
see § 151.99