10-4-656: VALET PARKING SIGNS:
In conjunction with each valet parking station approved by the traffic and parking commission, one movable ground sign that identifies the availability of valet parking and meets the city's parking sign guidelines may be located in the public right of way. The face of the sign shall not exceed two feet (2') in width and two and one-half feet (2.5') in height and the sign shall not exceed fifty inches (50") in height. Prior to placement of the sign in the public right of way, the sign owner must obtain a location approval from the city as provided in section 10-4-657 of this article. The sign shall only be visible from the public right of way during hours that the valet parking is in operation.
   A.   Frontage On Two Streets: In addition to any sign otherwise authorized by this section, if a business has frontage on two (2) streets, then an additional movable ground sign that meets the city's parking sign guidelines may be placed along the second street frontage to direct drivers to valet parking. The second valet parking sign shall be subject to the same restrictions set forth in this subsection and applicable to the first valet parking sign.
   B.   Parking Meter Signs: In addition to any sign otherwise authorized by this section, an additional sign that identifies the availability of valet parking and meets the city's parking sign guidelines may be placed on a parking meter located in the valet parking zone authorized by the traffic and parking commission. The sign shall not exceed one square foot in area.
   C.   Sign Accommodation: The architectural commission may grant a sign accommodation pursuant to article 9 of this chapter to authorize signs permitted by this section to vary from the city's parking sign guidelines. (Ord. 96-O-2257, eff. 5-10-1996)