10-3-1980.8: DENSITY:
   A.   Maximum Floor Area Ratio: Notwithstanding any other provision of this code, a mixed use development in the M-PD-3 zone, including all components, shall have a maximum aggregate floor area ratio no greater than 2.0:1. Above grade parking facilities shall not be considered when calculating the floor area ratio of a mixed use development pursuant to this section, provided the parking complies with the requirements of subsection 10-3-1980.9C of this article.
   B.   Maximum Commercial Floor Area: The maximum permitted floor area devoted to commercial uses in the M-PD-3 zone shall be six thousand three hundred eighty three (6,383) square feet.
   C.   Maximum Number Of Residential Units: The number of residential units that may be included in a mixed use development in the M-PD-3 zone shall not exceed three (3) dwelling units with a maximum floor area of eight thousand five hundred (8,500) square feet in totality (approximately 2,800 square feet per unit) in an area with an underlying zone of R-1, and twenty one (21) dwelling units in an area with an underlying zone of C-3. Notwithstanding, in the area with an underlying zone of C-3, a project may incorporate two (2) additional residential units, if those residential units are deed restricted units available for moderate income households for the longest term feasible, with a minimum size of seven hundred fifty (750) square feet per affordable unit, for a total number of twenty three (23) units in thirty three thousand two hundred thirty (33,230) square feet of area in the underlying zone of C-3. (Ord. 07-O-2532, eff. 12-14-2007)