Development within the industrial districts shall comply with the following design standards.
(A) All industrial buildings shall comply with the Building Code(s) adopted by the City of Bethany.
(B) Structures shall face a public or private street. If the structure is located on a corner lot, the structure should face and be addressed from the street which the front yard abuts, as shown on the approved plat of the addition the structure is located.
(C) Building materials.
(1) Exterior finishes of buildings or structures facing a street shall be constructed and maintained using wood clapboards or equivalent, brick, metal, vinyl or stone, or a combination of wood, brick, metal, vinyl and stone.
(2) Exterior accents of buildings or structures facing street shall consist of stucco, Exterior Insulation and Finish System (EIFS), wood clapboards or equivalent, brick, metal, vinyl or stone.
(3) Vinyl siding and metal siding shall not be permitted for use as exterior siding for primary or accessory buildings on facades which face a street for which the structure is addressed. Maintenance and replacement of existing siding is permitted.
(D) The following provision shall apply in industrial districts. Whenever either a rear or interior side yard abuts a residential district, then the setback shall be no less than 25 feet.
(Ord. 1974, passed 8-6-19)