Table 158.022(A): Industrial District Bulk and Yard Regulations establish bulk and yard regulations for the residential zoning districts. These regulations apply to all uses within that district unless a different standard is listed for a specific use.
Table 158.022(A): Industrial District Bulk and Yard Standards
BULK AND YARD | I-L | I-H |
BULK AND YARD | I-L | I-H |
Lot Dimensions | ||
Lot Width (minimum) | None | None |
Corner Lot Width (minimum) | None | None |
Lot Area (minimum) | None | None |
Lot Area (minimum) per dwelling unit | None | None |
Lot Depth (minimum) | None | None |
Setbacks | I-L | I-H |
Front (minimum) feet | 25 feet | 25 feet |
Side - Interior Lots (minimum) feet | None | None |
Side - Street Lots (minimum) feet | 25 feet | None |
Side - Corner Lots (minimum) feet | 25 feet | None |
Rear (minimum) feet | 15 feet | 15 feet |
Intensity | I-L | I-H |
Lot Coverage (maximum) | None | None |
Height (maximum) feet | 35 feet or 2- 1/2 stories | 35 feet or 2- 1/2 stories |
Notes:
1. Lot width measured at required front yard setback.
2. Setbacks are measured from the outside edge of the public right-of-way.
3. If 50% or more of the lots on one side of a street between two intersecting streets are improved with buildings which have observed an average setback line greater or less than 25 feet and no building varies more than five feet from this average setback line, then said building may be erected at the setback so established by the existing buildings.
4. Lot coverage measured as combined total area covered by main and accessory buildings.
(Ord. 1974, passed 8-6-19)