(A) Concrete curb and gutter shall be provided along the outside edge of all street pavements in subdivisions where the density of development is three lots per gross acre or greater.
(B) Curbs and gutters, if necessary, shall be installed by the subdivider in compliance with the approved plans, profiles and cross-sections. They shall be constructed of concrete, and they shall be at least 18 inches wide and not less than six inches thick where the curb abuts the street pavement.
(C) Curbs and gutters shall be constructed in conjunction with the street pavements on all streets where parking is to be permitted.
(D) Curb construction for concrete pavements shall be integral. Roll-type curbs shall be permitted where the distance between the back of the curb and the nearest sidewalk is at least three feet on residential and feeder streets.
(E) All plans for the installation of the curb and gutter shall conform to all applicable sections of this chapter and shall be approved by the County Highway Supervisor or Highway Engineer, or the Plan Commission in conjunction with the appropriate city appointed officials prior to the installation.
(Ord. 466, § 4-8-3, passed 5-11-98) Penalty, see § 151.999